Specifications Overview
Product drawing
Cable Configuration
| Connector A | MPO/MTP Female (12-fiber, non-pinned or pinned optional) |
| Connector B | 8× FC/APC or 12× FC/APC Simplex |
| Fiber Type | OS2 Single Mode 9/125µm |
| Fiber Count | 8-fiber or 12-fiber breakout |
| Cable Structure | Round trunk cable with fanout legs |
| Trunk Cable Diameter | 3.0mm ± 0.1mm |
| Fanout Leg Diameter | 0.9mm or 2.0mm tight-buffered |
| Fanout Length | 0.5m, 1.0m, or custom (from breakout boot) |
| Jacket Rating | LSZH (default), OFNP, PVC optional |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Standard Color | Yellow (OS2), Black (outdoor) |
Optical Performance
| Parameter | Single Mode (OS2) |
| Insertion Loss (MPO side) | ≤0.35 dB (per mated pair) |
| Insertion Loss (FC/APC side) | ≤0.30 dB (per connector) |
| Return Loss (MPO) | ≥45 dB (UPC grade) |
| Return Loss (FC/APC) | ≥60 dB |
| Fiber Attenuation | ≤0.35 dB/km @ 1310nm, ≤0.25 dB/km @ 1550nm |
| Operating Wavelength | 1260~1625 nm |
Structure & Polarity
Cable Structure Description
The MPO/MTP to FC/APC breakout cable features a robust round trunk cable (typically 3.0mm diameter) housing 8 or 12 single-mode fibers. At one end, fibers terminate into a 12-position MPO/MTP female connector with alignment pins (or non-pinned version).
At the opposite end, individual fibers fan out through a protective breakout boot, each terminated with a simplex FC/APC connector. Fanout legs are available in 0.9mm or 2.0mm tight-buffered designs with standard lengths of 0.5m or 1.0m from the boot.
Each FC/APC leg is clearly labeled with sequential numbering (Fiber 1, Fiber 2, … Fiber 8/12) corresponding to the MPO fiber positions. Durable strain relief boots on both MPO and FC ends protect against bend-induced stress. Optional protective dust caps for FC/APC connectors and MPO end-face are included.
Applications
Data Center Migration from FC to MPO Infrastructure
Enables legacy single-mode equipment with FC/APC interfaces to connect to modern high-density MPO/MTP trunk infrastructure, facilitating phased network upgrades without complete equipment replacement.
DWDM and Optical Transport Networks
The APC low-reflection interface makes these cables ideal for connecting DWDM mux/demux units, optical amplifiers, and OTDR test equipment to MPO-based fiber distribution systems in metro and long-haul networks.
Test and Measurement Setups
Provides flexible breakout connections for optical test equipment requiring individual FC/APC ports while integrating with MPO patch panels, ideal for lab environments and field testing scenarios.
Fiber Distribution from MDA/HDA
In structured cabling designs following TIA-942 standards, these cables distribute individual single-mode fiber links from MPO-based Main Distribution Areas (MDA) or Horizontal Distribution Areas (HDA) to equipment racks requiring traditional FC/APC connectivity.
Factory Testing Process
3D Interferometer Endface Inspection
All MPO and FC/APC connector endfaces inspected per IEC 61300-3-35 to verify geometry parameters (radius of curvature, apex offset, fiber height) and ensure surface cleanliness meeting IEC 61300-3-35 Grade A requirements.
Insertion Loss Testing
Each individual fiber link tested at 1310nm and 1550nm wavelengths using calibrated test equipment. Results documented with serial number traceability.
Return Loss Verification
FC/APC connectors verified to meet ≥60dB return loss specification using OTDR or optical return loss test sets, ensuring suitability for high-performance applications.
Polarity & Continuity Verification
Automated polarity testing confirms correct fiber mapping from MPO positions to corresponding FC/APC legs, with visual light source verification for rapid fault detection.
Customization Options
Length Flexibility
Any length from 1 to 100 meters; longer lengths available for outdoor or campus applications with appropriate cable construction
Select Length (meters)
01
Fiber Type Options
OS2 single mode (standard), as well as bend-insensitive G.657.A2/B3 fibers for tight routing applications
02
Fiber Count Configurations
8-fiber or 12-fiber standard; 24-fiber breakout available using dual MPO connectors or ribbon cable construction
03
Connector Polish Types
FC/APC (8° angle, standard) or FC/UPC (physical contact); MPO available in UPC or APC polish.
04
MPO Pin Configuration
Female with pins (pinned), female without pins (non-pinned), or male connectors to match mating infrastructure
05
Jacket Ratings
LSZH flame-retardant (standard), OFNP plenum-rated for air handling spaces, PVC for general applications, or outdoor-rated with armored/gel-filled construction
06
Fanout Options
Breakout leg length (0.5m, 1.0m, or custom), leg diameter (0.9mm or 2.0mm), and breakout boot position can be specified
07
Labeling & Marking
Custom cable labels, sequential fiber numbering schemes, asset tags, and color-coded boots available for simplified identification and management
08
Related Products & Accessories
MPO/MTP Cassette Modules
High-density cassettes converting MPO trunk connections to LC, SC, or FC duplex ports for structured cabling applications
MPO/MTP Fiber Patch Panels
1U and 2U rack-mount panels with MPO adapter plates for centralized cross-connect management supporting up to 144 fibers per RU
MPO/MTP Cleaning Tools
Specialized cleaners including one-click MPO cleaners, cleaning cassettes, and lint-free wipes for maintaining optimal connector endface quality
FC/APC Optical Adapters
Simplex and duplex FC/APC bulkhead adapters for panel mounting, available in bronze sleeve (standard) or ceramic sleeve (high-performance) versions
MPO/MTP Loopback Modules
Testing and diagnostic loopback devices for 8-fiber, 12-fiber, and 24-fiber MPO interfaces supporting network troubleshooting and equipment validation
Cable Management Accessories
Breakout boots, strain relief boots, protective caps, cable ties, and labeling systems for professional installation finish
Hot Tags: mpo/mtp cables-fc/apc-sm-8/12 fibers, China mpo/mtp cables-fc/apc-sm-8/12 fibers manufacturers, suppliers, factory
