6 Port Fiber Termination Box
for FTTH Last-Mile Access | DIMI FIBER Factory Supply
The DIMI FIBER 6 Port Fiber Termination Box is engineered for fast, secure and organized FTTH last-mile deployment. With an IP65 wall-mountable enclosure, configurable SC or LC adapter ports, and an internal layout that protects fiber bend radius, it helps installers complete drop cable termination in minutes - not hours. The enclosure supports fusion splicing, mechanical splicing and field fast connectors, and can be pre-loaded with a 1×4 mini PLC splitter for compact distribution nodes. As a factory-direct manufacturer and OEM/ODM partner, DIMI FIBER supports bulk-order procurement, custom adapter configurations and export-ready packaging for ISPs, FTTH contractors and fiber product distributors worldwide.
Customer Pain Points
Outdoor Boxes Failing Under Rain, Dust and UV
Many low-cost fiber termination boxes are sold as "waterproof" but fail within 12–18 months of outdoor wall-mount use, leading to micro-corrosion on adapters, fogged enclosures and intermittent subscriber drops.
How DIMI FIBER Solves It: DIMI FIBER uses UV-resistant housing material and offers IP65 (standard) and IP66 (optional, verified by test report) sealing across the 6 port termination box range, so the same SKU performs reliably across indoor and outdoor FTTH access points.
Disorganized Internal Routing in Small Enclosures
Compact 6-port boxes often suffer from cramped layouts: drop cables crowd splice trays, technicians cannot route excess slack, and bend radius is violated to make wires fit. The result is insertion loss drift, subscriber complaints and slow truck rolls.
How DIMI FIBER Solves It: The internal layout of the DIMI FIBER 6 port FTTH box defines separate splice, adapter and drop-cable zones, with guided bend paths so installers route fibers correctly the first time, without forcing or tight bends.
Slow Field Installation Increases Project Cost
For ISPs deploying hundreds of access points, every extra five minutes per box adds up across the rollout. Hard-to-open lids, fiddly grommets and unclear cable entry points slow crews and inflate labor cost.
How DIMI FIBER Solves It: The enclosure is designed with installer-friendly fasteners, labeled cable inlets and pre-fitted sealing rings so a trained crew can complete the box-side work in minutes, with consistent appearance across thousands of sites
Adapter and PLC Splitter Incompatibility
FTTH project tenders frequently specify adapter polish (UPC vs APC), connector type (SC vs LC) and splitter loading. Generic boxes force buyers to add a separate splitter housing or replace adapters in the field, raising BOM count and rework risk.
How DIMI FIBER Solves It: DIMI FIBER supplies the box pre-configured with the right adapter type, polish and an optional pre-loaded 1×4 PLC splitter, so one SKU matches the tender and arrives ready for installation.
Distributors Cannot Differentiate on Commodity FTTH Products
Resellers stocking generic ODP boxes compete only on price, eroding margin and inventory turn. They need branded, packaged, datasheet-ready product to position above no-name suppliers.
How DIMI FIBER Solves It: DIMI FIBER offers OEM/ODM packaging, private-label color and logo, customized retail boxes and downloadable datasheets, helping distributors build a defensible local brand on top of a stable factory supply chain.
Unstable Supply and Lead Time Across Project Rollouts
A common failure mode is suppliers quoting low prices on small orders but missing delivery on the second or third project shipment, forcing contractors to re-qualify a new vendor mid-project.
How DIMI FIBER Solves It: As a factory-direct manufacturer, DIMI FIBER supports project-based supply with controlled lead times, repeat-order BOM consistency and capacity planning aligned to multi-batch FTTH rollouts.
Technical Specifications
|
Parameter |
Confirmed / Benchmark / Suggested Specification |
|
Product Name |
DIMI FIBER 6 Port Fiber Termination Box |
|
Product Category |
Wall-mount fiber distribution / ODP box |
|
Model / Type |
DMF-FTB-6 (suggested code) |
|
Port Capacity |
6 SC simplex / 12 LC duplex |
|
Adapter Type |
SC/UPC, SC/APC, LC/UPC, LC/APC |
|
PLC Splitter Option |
Optional 1×4 mini PLC splitter, pre-loaded |
|
Housing Material |
UV-resistant ABS or PC+ABS |
|
Color |
Standard white or black; customized OEM |
|
IP Rating |
IP65 standard; IP66 optional |
|
Splicing Capacity |
Up to 12 splice points (suggested) |
|
Cable Entry / Exit |
1 feeder inlet + 6 drop outlets with sealing rings |
|
Inlet Cable Diameter |
Ø6–10 mm |
|
Drop Cable Diameter |
2×3 mm to 3×5 mm flat drop cable |
|
Installation Method |
Wall-mount with mounting holes; pole-mount kit optional |
|
Dimensions (L×W×H) |
Approx. 180–220 × 130–140 × 35–45 mm |
|
Weight |
Approx. 0.3–0.5 kg |
|
Operating Temperature |
-40°C to +75°C |
|
Storage Temperature |
-40°C to +85°C |
|
Flame Retardant Grade |
UL94-V0 (suggested target) |
|
Compatible Cable Type |
FTTH drop cable, indoor cable, small round cable |
|
Locking |
Screw-lock standard; key-lock optional |
|
Sample Lead Time |
Approx. 3–7 working days (suggested) |
|
Bulk Lead Time |
Approx. 2–3 weeks (suggested) |
|
Sample Policy |
Available; cost and freight to be confirmed per project |
|
Certifications |
CE, RoHS available on request; ISO 9001 factory |
|
Test Reports |
IP, assembly, drop and visual inspection reports available upon request |
|
OEM/ODM |
Color, logo, packaging, adapter, pre-loaded accessory |
|
Packaging |
Inner box + export carton (specs to be confirmed) |
Applications
Residential FTTH Drop Cable Termination
For residential FTTH rollouts, the DIMI FIBER 6 port fiber termination box terminates a single feeder cable and distributes it to up to six subscriber drops, mounted on the exterior wall or near the home's service entry. The IP65 housing protects against weather, and the organized internal routing keeps each subscriber's fiber traceable for future moves, adds and changes.
Villa Cluster and Small Building Fiber Access
In villa clusters and low-rise compounds, fiber needs to reach small groups of subscribers with minimal visual impact and reliable outdoor performance. The compact wall-mount design and IP-rated enclosure of the DIMI FIBER termination box fit cleanly on perimeter walls, gate posts and entryways, with optional 1×4 PLC splitter loading for compact distribution to surrounding homes.
Ask for PLC splitter loading options for villa projects.
Apartment, MDU and Corridor Weak-Current Cabinet
In apartment buildings and MDUs, fiber access points are typically installed in corridor weak-current cabinets or service shafts where space is tight and rework access is limited. The compact dimensions and structured internal routing of the DIMI FIBER 6 port FTTH box allow installers to fit, splice and label drops cleanly, supporting ongoing subscriber additions without disturbing existing connections.
Request the interior drawing for MDU cabinet planning. Contact now
Small Business and SOHO Fiber Termination
Small businesses, retail outlets and SOHO sites typically need fewer than six fiber drops but still require professional appearance and stable performance. Installed near the demarcation point, the DIMI FIBER box terminates business-grade FTTH service while presenting a clean, lockable interface to the client - useful when the access point is visible to staff or customers.
Get a quote for SMB and SOHO FTTH supply.
Outdoor Building Entry and Pole-Side Access Point
Outdoor building entries, courtyard walls and pole-side positions demand IP-rated, lockable, UV-tolerant enclosures. The DIMI FIBER 6 port termination box is engineered for exactly these positions, with sealed cable entries, screw-lock closure (key-lock optional) and a UV-resistant housing rated to IP65 - IP66 verifiable on request.
Request the IP test report for outdoor tender submissions.
Compact 1×4 PLC Splitter Distribution Node
With a pre-loaded 1×4 mini PLC splitter, the same enclosure becomes a low-density distribution node for FTTH branches - a useful in-between solution where a full splitter cabinet is oversized but a single drop is insufficient. This consolidates the splitter and termination function into one weather-rated wall-mount unit.
Quality Assurance
-Quality Control and Test Support You Can Submit to a Project Owner
DIMI FIBER supports its 6 port fiber termination box with a documented quality control workflow built around the needs of project buyers, tender submissions and repeat-order programs.
Incoming raw material is inspected for resin grade, dimensional accuracy and color consistency. Each enclosure is checked for housing fit, sealing ring placement, adapter alignment and lockable closure operation.
Pre-shipment inspection verifies external appearance, internal layout, mounting hole accuracy, packaging integrity and quantity per carton. Customers can request supporting documentation, including IP rating test references, drop and impact references, assembly inspection records and material declarations.
CE, RoHS and ISO 9001 documentation can be provided upon request, with the final compliance status confirmed against the specific SKU and the customer's destination market. For tender submissions and project handover packs, DIMI FIBER can prepare a customized documentation bundle covering datasheet, drawing, packaging spec, inspection records and test report references.
Factory Strength & Supply Capability
-Project-Ready Manufacturing and OEM/ODM Supply from DIMI FIBER
DIMI FIBER manufactures its 6 port fiber termination box as part of a broader passive FTTH access portfolio, supporting injection moulding, adapter integration, splice tray fitting, optional PLC splitter pre-loading, assembly and export packaging in one supply chain.
The factory operates with standardized BOM control across repeat orders, which matters for ISPs and contractors who need every shipment in a multi-batch FTTH project to look, fit and perform identically to the first. OEM and ODM customers can specify color, logo, retail packaging, inner-box quantity, adapter type and pre-loaded accessories without re-tooling. Sample units can be provided for project validation, with bulk lead times planned around the customer's deployment schedule.
DIMI FIBER supports distributor programs with private-label SKUs and project programs with locked production windows, factory-direct quotation and consistent documentation across shipments. The result is a supply relationship suitable for long-term FTTH procurement - not a one-off transactional purchase.
FAQ
Q: What is the DIMI FIBER 6 Port Fiber Termination Box and what is it used for?
A: It is a compact wall-mount fiber distribution enclosure designed for FTTH and FTTx last-mile access. It terminates a feeder cable and distributes it to up to six subscriber drops via SC or LC adapters. Typical applications include residential FTTH, villa clusters, MDU corridors, small business fiber access, outdoor building entry points and compact PLC splitter distribution nodes.DIMI FIBER supplies it as a factory-direct, OEM/ODM-supported product for ISPs, contractors and distributors.
Q: Can this fiber termination box be installed outdoors?
A: Yes. The standard version is IP65 rated, suitable for outdoor wall-mount FTTH access points, with UV-resistant housing material and sealed cable entries. An IP66 option is available on request, with the final IP grade verified by test report before order confirmation. For severe outdoor environments, please share your environmental requirements so DIMI FIBER can recommend the right SKU.
Q: How many adapters and what adapter types are supported?
A: The box accepts 6 SC simplex adapters as standard, with 12 LC duplex available as a customized variant. Adapter polish types include SC/UPC, SC/APC, LC/UPC and LC/APC. DIMI FIBER pre-loads the adapter type specified on your purchase order, so the unit arrives ready for installation to your tender spec.
Q: Can a PLC splitter be installed inside the box?
A: Yes, the internal layout supports an optional 1×4 mini PLC splitter, which [DIMI FIBER] can pre-load at the factory. This converts the termination box into a compact distribution node for low-density FTTH branches - useful for villa clusters, MDU corridors and pole-side branches. Please confirm splitter requirement at the quotation stage so it can be factored into BOM and lead time.
Q: Does the box support fusion splicing, mechanical splicing and fast connectors?
A: Yes. The splice tray and adapter mounts are compatible with all three field termination methods used in FTTH crews: fusion splicing, mechanical splicing and field-installable fast connectors. This allows mixed-skill teams to standardize on one SKU across the network without retooling per region or per crew.
Q: What cable types are compatible?
A: The enclosure is designed for FTTH drop cable (typically 2×3 mm to 3×5 mm flat), small round indoor cable and feeder cable in the Ø6–10 mm range (industry reference; verify with the cable supplier). For non-standard cable diameters, DIMI FIBER can confirm sealing gland compatibility against the drawing.
Q: Do you support OEM and ODM for distributors and private-label buyers?
A: Yes. DIMI FIBER supports OEM/ODM for color, logo, retail packaging, inner-box layout, adapter type and pre-loaded accessories. Distributors can list a private-label SKU without tooling investment. For OEM packaging samples and a distributor program walkthrough, please contact DIMI FIBER sales.
Q: What is the MOQ and the typical lead time?
A: A typical MOQ starts around 100 pcs (suggested target; subject to confirmation). Sample lead time is approximately 3–7 working days and bulk lead time is approximately 2–3 weeks, both subject to current production schedule, configuration complexity and OEM packaging requirements. Please share your quantity, configuration and project schedule for a confirmed quote.
Q: Can DIMI FIBER provide samples before a bulk order?
A: Yes. Samples are available for engineering validation, installation trials and project approval. Sample cost, freight terms and lead time depend on the configuration (adapter type, polish, PLC option) and the customer's project context. Please share project details when requesting a sample so the sample matches the eventual bulk-order configuration.
Q: What documents can be provided for tender submissions?
A: DIMI FIBER can provide a documentation bundle including product datasheet, mechanical drawing, installation guide, packaging spec, inspection records and IP test report references. CE, RoHS and ISO 9001 documentation can be provided on request, with final compliance status confirmed against the specific SKU and destination market.
Q: Are the specifications shown on this page final and confirmed?
A: Specifications confirmed by DIMI FIBER's factory drawing and product datasheet are presented as confirmed values. Specifications shown as Industry Reference or Suggested Target are based on the broader FTTH product category and competitor benchmarks, and must be verified against the specific DIMI FIBER SKU and the customer's order before publication or tender submission.
Q: What information should I include when requesting a quotation?
A: For the fastest, most accurate quote, please include: required quantity, adapter type and polish (SC/UPC, SC/APC, LC/UPC, LC/APC), PLC splitter requirement (yes/no, ratio), IP rating preference (IP65 or IP66), OEM packaging needs, destination country, target delivery date and any tender or specification document we should align to. DIMI FIBER sales will respond with model confirmation, factory quote and lead time.
Build Your FTTH Catalog with DIMI FIBER OEM/ODM Supply
Distributors and project integrators can list a private-label 6 port fiber termination box under their own brand, with DIMI FIBER supporting color, logo, retail packaging, inner-box layout, adapter loading and pre-installed accessories. Share your target market, branding requirements and projected volume, and DIMI FIBER will return an OEM/ODM proposal including packaging mock-ups, MOQ, lead time and documentation support to underpin your local catalog.
Hot Tags: 6 port fiber termination box, 6 port FTTH termination box, FTTH fiber termination box, fiber optic terminal box, fiber distribution box, outdoor fiber termination box, IP65 fiber termination box, wall mount fiber termination box, drop cable termination box, fiber termination box with SC APC adapter, fiber termination box with PLC splitter, 1x4 PLC splitter fiber box, FTTH box manufacturer, fiber termination box supplier
