China MPO/MTP Single Mode Fiber Cable Manufacturers Suppliers Factory

High-Density OS2 Fiber Solutions for Data Centers & Telecom Networks

MPO/MTP single mode fiber cables are pre-terminated optical assemblies engineered for high-density network architectures. Utilizing OS2 single mode fiber and multi-fiber connectors, these cables provide low-loss transmission for standard 40G, 100G, 400G, and 800G optical transceivers. Each assembly is factory-terminated and tested to reduce on-site installation time and ensure link budget compliance in enterprise and telecom infrastructures.

Low Loss OS2 MPO Fiber Cable
DimiFiber OS2 MPO trunk cables are factory-terminated optical assemblies designed for high-density data center backbone and campus infrastructure. Engineered for 40G, 100G, and 400G transmission,

view more
MPO To LC Single Mode Fiber Cable
Dimifiber MPO-LC patch cables provide high-density interconnects for the migration from MPO-based backbone cabling to LC-interface network equipment. Engineered for reliability in data centers and

view more
MPO Single Mode Patch Cord
The DimiFiber MPO Single Mode Patch Cord is engineered for high-density network infrastructure, including 40G/100G/200G/400G Ethernet environments. Designed for data centers and telecommunications

view more
MPO Single Mode Trunk Cable
Dimi MPO Trunk Cables are premium, factory-terminated fiber assemblies designed for rapid, reliable, and scalable network deployment. Engineered for modern high-speed infrastructure, our solution

view more
OS2 MTP Single Mode Fiber Cable
The OS2 MTP/MPO trunk cable is a high-density, pre-terminated fiber solution. It utilizes 9/125μm single-mode fiber to support high-bandwidth, long-distance signal transmission. The MTP/MPO interface

view more
OS2 MPO Single Mode Fiber Cable
DimiFiber OS2 MPO/MTP trunk cables are engineered for high-density fiber interconnections in hyperscale data centers and telecommunication backbones. These cables utilize 9/125μm OS2 single-mode

view more

Technical Performance

1. Optical Specifications
Standard Insertion Loss: Less than or equal to 0.35dB
Elite / Low Loss Insertion Loss: Less than or equal to 0.25dB (Recommended for tight 400G/800G link budgets)
Return Loss: Greater than or equal to 60dB (APC Polish)

2. Physical & Environmental Setup
Fiber Types: OS2 Single Mode (G.652.D / G.657.A1 / G.657.A2 bend-insensitive fiber)
Fiber Counts: 8-fiber, 12-fiber, 16-fiber, and 24-fiber configurations
Polarity Options: Type A (Straight), Type B (Cross), Type C (Pair Flip)
Operating Temperature: -20°C to +70°C

3. Flame Retardant Ratings & Compliance
We support global deployment regulations with verified jacket materials:
OFNP (Plenum): Standard for North American air plenum spaces.
LSZH (Low Smoke Zero Halogen): Standard for European data center safety.
OFNR (Riser): Standard for vertical shafts.
Compliance: Fully compliant with RoHS, REACH, CE, and UL testing.

Technical Specifications Table

Parameter	Specification
Fiber Type	OS2 Single Mode (G.652.D / G.657.A1 / G.657.A2)
Connector Type	Standard MPO / MTP Compatible
Fiber Count	8F / 12F / 16F / 24F
Wavelength	1310nm / 1550nm
Insertion Loss (IL)	Standard: ≤0.35dB / Elite / Low Loss: ≤0.25dB
Return Loss (RL)	≥60dB (APC Polishing)
Polarity	Type A / Type B / Type C
Jacket Material	LSZH / OFNP / OFNR / PVC
Operating Temperature	-20°C to +70°C
Standards Compliance	Telcordia GR-1435-CORE, IEC 61754-7, TIA-604-5, RoHS, REACH

Quality Control & Verification

Every patch cord undergoes a 100% factory verification process before shipping. Test documentation is generated for each production batch.

End-Face Geometry

Microscopic inspection is performed to confirm zero scratches, pits, or contamination on the ferrule surface.

3D Interferometer Testing

Verification of fiber height, radius of curvature, and apex offset according to Telcordia GR-326 standards.

Optical Measurement

Verification of Insertion Loss (IL) and Return Loss (RL) at 1310nm and 1550nm.

Polarity Mapping

Hardware check to ensure fiber channels match the specified wiring type (A/B/C).

Custom Manufacturing Options

As an OEM/ODM manufacturer, we supply tailored assemblies based on project layouts:

Connectors

Standard MPO or high-performance MTP compatible connectors (Male with pins / Female without pins).

Cable Construction

2.0mm/3.0mm Round, Flat Ribbon, or High-Density Micro-cable.

Breakout Styles

Customized breakout lengths and staggered leg designs for specific switch patch panels.

Packaging

Serialized tracking labels, custom barcoding, and neutral packaging for distributors.

FAQ

Q: What is the difference between standard MPO and MTP connectors?

A: MTP is a brand of MPO connector that incorporates specific mechanical enhancements such as a floating ferrule and elliptical guide pins to improve durability and optical performance. Both types conform to the international IEC 61754-7 and TIA-604-5 standards and are fully intermateable.

Q: How do I select the correct jacket rating (Plenum vs. LSZH)?

A: Selection depends on local building codes. OFNP (Plenum) features high fire resistance and low smoke generation, which is mandatory for air-handling spaces in North America. LSZH releases zero halogens and minimal toxic smoke during combustion, making it the standard requirement across Europe and the UK.

Q: Do you provide individual test results?

A: Yes. Each cable assembly is assigned a distinct serial number. The associated test report—including 3D interferometry metrics, Insertion Loss, and Return Loss values—is included with the shipment.

Q: What is your standard production lead time?

A: Standard configurations (8F/12F/24F OS2 cables with regular lengths) typically ship within 5 to 7 business days. Bulk OEM orders or custom staggered breakouts require 2 to 3 weeks, depending on the current component inventory.

As one of the most professional mpo/mtp single mode fiber cable manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale custom made mpo/mtp single mode fiber cable from our factory.