China Custom MPO/MTP Multimode Fiber Cable Manufacturers Suppliers Factory

MPO/MTP Multimode Fiber Cable

MPO/MTP Multimode Fiber Cable is a high-density optical fiber assembly designed for modern data centers, cloud infrastructure, enterprise networks, and high-performance computing (HPC) environments.By integrating multiple fiber channels into a single, compact connector interface, this solution allows network operators to maximize port density, minimize cable congestion, and optimize rack airflow.

High Density MPO Multimode Fiber Cable
High Density MPO Multimode Fiber Cable is engineered for high-performance data center environments where maximum port density, streamlined cable management, and uncompromising signal integrity are

view more
MPO To LC Multimode Fiber Cable
Designed for modern high-density data center environments, The DIMI MPO to LC Multimode Fiber Cable provides a seamless bridge between MPO-based backbone cabling and LC optical interfaces.

view more
MPO Multimode Trunk Cable
DIMI MPO Multimode Trunk Cable is a factory-terminated, high-density fiber optic cabling solution engineered for modern data centers, enterprise networks, and AI computing facilities.

view more
OM5 MPO Multimode Fiber Cable
DimiFiber OM5 MPO cables are designed for high-density backbone, SAN, and High-Performance Computing (HPC) environments. By utilizing Wideband Multimode Fiber (WBMMF), these assemblies support Short

view more
OM4 MPO Multimode Fiber Cable
The OM4 MPO multimode fiber cable is a factory-terminated, high-density optical fiber assembly designed for data centers, enterprise backbones, cloud infrastructure, and telecom networks.

view more
OM3 MPO Multimode Fiber Cable
DIMI Fiber’s OM3 MPO Multimode Fiber Cable is engineered for high-density optical networks requiring reliable transmission and fast deployment.

view more

Key Features

High-Density Connectivity

Consolidates 8 to 144 fibers into a single connector, significantly reducing cable volume and improving thermal efficiency inside server cabinets.

High-Speed Transmission Support

Optimized for multi-channel parallel optics, providing reliable, low-latency bandwidth expansion for next-generation network architectures.

Streamlined Deployment

Pre-terminated factory assemblies eliminate complex field splicing, reducing installation time and deployment risks.

Optical Fiber Options

Fiber Type	Main Advantage	Typical Applications	Maximum 100G Distance
OM3 Multimode	Cost-effective short-reach transmission	40G data center networks, backbone cabling	70m
OM4 Multimode	High bandwidth and extended reach	100G/200G core infrastructure, backbone links	100m
OM5 Multimode	Supports SWDM (Short Wavelength Division Multiplexing)	Multi-wavelength upgrades, future-ready links	150m

Product Specifications

Parameter	Specification
Fiber Type	OM3 / OM4 / OM5 Multimode Fiber (Premium bend-insensitive glass)
Connector Type	MPO / Premium High-Performance MTP Connector
Connector Gender	Male (Pinned) / Female (Unpinned)
Fiber Count	8 / 12 / 24 / 48 / 72 / 144 Fibers (Customizable)
Polarity Type	Type A / Type B / Type C (TIA-568.3-D Compliant)
Cable Structure	Round Cable / Micro-distribution Cable / Ribbon Cable
Jacket Material	LSZH (Low Smoke Zero Halogen) / PVC / OFNP (Plenum-rated)
Compliance & Certifications	RoHS, REACH, CE, UL 910 (for OFNP), CPR (Euroclass) Compliant
Wavelength	850nm / 1300nm
Operating Temperature	-20°C to +70°C
Quality Testing	100% Insertion Loss & Return Loss Tested; 3D Interferometer Geometric Inspection

Connector & Polarity Options

Connector Gender Configuration
Male Connector
Includes high-precision steel guide pins to ensure exact alignment during mating. Typically used for backbone trunks and cassette interfaces.
Female Connector
Features alignment holes without guide pins. Typically used on patch cords to connect directly into active equipment or male trunk lines.

Polarity Configurations
Type A (Straight-Through)
Uses a key-up to key-down mapping. Ideal for traditional backbone architectures.
Type B (Cross/Reversed)
Uses a key-up to key-up mapping. Widely adopted in parallel optic 40G/100G/200G/400G applications.
Type C (Pairs Flipped)
Flips adjacent pairs of fibers. Suitable for duplex-based transmission migration.

Quality & Manufacturing Advantages

100% Factory Testing & End-Face Inspection
All assemblies are manufactured in an ISO-certified, dust-free environment. Each connector undergoes comprehensive 3D geometric interferometer testing and end-face inspection.
This strict geometric control ensures precise fiber alignment and reliable mating cycles, minimizing optical degradation over time.

Low Insertion Loss Performance
To meet tight optical power budgets in complex layouts, we offer Standard Loss, Low Loss, and Ultra-Low Loss (ULL) configurations.Our ULL connectors achieve an insertion loss of ≤ 0.35dB, maximizing system headroom and ensuring transmission stability.

Full Regulatory Compliance
Our cable jackets conform to strict global flame-retardant and environmental standards, featuring Plenum (OFNP) options for North American requirements and LSZH (CPR compliant) options for European building regulations.

Applications

Enterprise & Hyperscale Data Centers

Switch-to-switch links, server-to-switch clustering, and core high-density structured cabling.

Cloud Computing & HPC Infrastructure

High-bandwidth, low-latency interconnections for large-scale computing clusters.

Telecommunications Networks

Central office distribution, Optical Distribution Networks (ODN), and infrastructure upgrade projects.

Custom Manufacturing Services

We offer flexible OEM/ODM options to support specialized project layouts:

Tailored Configurations

Custom lengths, specific fiber counts, specialized jacket colors, and optional pulling-eye kits.

Bespoke Packaging

Custom labeling, barcoding, and serialized test report integration for simplified asset tracking.

FAQ

Q: What is the mechanical difference between MPO and MTP connectors?

A: MPO is the generic international standard for multi-fiber push-on connectors. MTP connectors are premium-grade MPO connectors engineered with enhanced mechanical features, such as floating ferrules and elliptical guide pins, to improve durability and optical performance.

Q: Are these cables certified for commercial building installations?

A: Yes. We supply UL-listed OFNP (Plenum) cables for strict North American fire codes and CPR-rated LSZH cables to comply with European safety standards.

Q: Which polarity type should be selected for 100G networks?

A: Type B Polarity is the industry baseline for parallel optics (such as 100G BASE-SR4). If your infrastructure utilizes specific cassette-to-cassette links, a combination of Type A and Type B might be required.Our technical team can assist with precise wiring mapping.

Q: Do you provide individual test verification?

A: Yes. Every single cable assembly is 100% serialized and shipped with an individual test report detailing exact Insertion Loss (IL) and Return Loss (RL) values.

As one of the most professional mpo/mtp multimode fiber cable manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale custom made mpo/mtp multimode fiber cable from our factory.