Jul 06, 2026
Indoor vs Outdoor Access Point: Choose the Right AP
Choosing between an indoor and outdoor access point is rarely just a question of where the box gets mounted. In practice, the difference between an indoor vs ou
-
![How to Choose a Duplex LC Fiber Cable | DIMIFIBER]()
Apr 27, 2026How to Choose a Duplex LC Fiber Cable | DIMIFIBERA duplex LC connector is one of the most widely used fiber optic connector types in modern networks. You will find it on fiber patch panels, SFP/SFP+view more -
![Active Optical Cable Guide: What Is an AOC Cable and How to Choose One | DIMI...]()
Apr 27, 2026Active Optical Cable Guide: What Is an AOC Cable and How to Choose One | DIMI...As data centers push toward 100G, 400G, and beyond, the link between two ports is no longer just a cable - it is a design decision that affects densitview more -
![OSFP vs OSFP-XD: Pick the Right 1.6T Form Factor]()
Apr 24, 2026OSFP vs OSFP-XD: Pick the Right 1.6T Form FactorQuick Answer: OSFP or OSFP-XD? Choose OSFP (OSFP1600) if you already operate 400G or 800G OSFP platforms, want ecosystem continuity, and your switch rview more -
![Breakout Cables Explained: Types, How to Choose, and Common Configurations]()
Apr 23, 2026Breakout Cables Explained: Types, How to Choose, and Common ConfigurationsA breakout cable lets you split one high-speed, multi-lane switch port into several lower-speed connections. If you manage data center switches, top-oview more -
![What Is a Trunk Cable? MPO/MTP Data Center Cabling Guide]()
Apr 21, 2026What Is a Trunk Cable? MPO/MTP Data Center Cabling GuideIn any data center build or expansion, cabling decisions shape everything downstream-airflow management, change control, scalability, and how quicklyview more -
![MPO Cable Types: How to Choose the Right Trunk, Breakout, or Patch Cord]()
Apr 21, 2026MPO Cable Types: How to Choose the Right Trunk, Breakout, or Patch CordChoosing the right MPO cable comes down to five decisions: cable format, polarity method, fiber architecture, connector gender, and fiber mode. In praview more -
![AON vs PON: Which FTTH Architecture Should You Choose?]()
Apr 20, 2026AON vs PON: Which FTTH Architecture Should You Choose?Choose PON when the goal is cost-efficient, scalable fiber access for a large subscriber base, and choose AON when you need dedicated point-to-point bview more -
![Can Multimode Fiber Still Support 40G/100G Ethernet?]()
Apr 17, 2026Can Multimode Fiber Still Support 40G/100G Ethernet?Yes, multimode fiber can still carry a 40G/100G Ethernet migration, but only on short links and only when the design actually matches the cabling planview more -
![How to Test an Ethernet Cable for Faults]()
Apr 16, 2026How to Test an Ethernet Cable for FaultsA wired connection that keeps dropping, negotiates at 100 Mbps instead of Gigabit, or refuses to link at all usually points to one thing first: the caview more -
![GPON SFP Guide: OLT vs ONU, B+ vs C+]()
Apr 14, 2026GPON SFP Guide: OLT vs ONU, B+ vs C+A GPON SFP is not a standard fiber transceiver with a different label. It is an optical module built specifically for Gigabit Passive Optical Networkview more -
![Passive Optical TAP: What It Is, How to Choose One, and When to Use It]()
Apr 13, 2026Passive Optical TAP: What It Is, How to Choose One, and When to Use ItA passive optical TAP (traffic access point) is a powerless, inline hardware device that splits the light on a fiber link to send a copy of all traffiview more -
![PLC Splitter Guide: Types, Loss, and How to Choose]()
Apr 10, 2026PLC Splitter Guide: Types, Loss, and How to ChooseA PLC splitter is the passive device that divides one optical signal into multiple output paths in a fiber access network. In GPON and FTTx deploymentview more
