OS2 MPO to FC Breakout Cables for 8F and 12F Orders

DIMI MPO to FC OS2 breakout cables terminate a multi-fiber MPO connection in eight or twelve separate FC simplex plugs. They use OS2 9/125 µm single-mode fiber and are intended for FC-equipped distribution frames, optical instruments and equipment assemblies.
Specify the number of FC ports first: 8F provides eight FC plugs, while 12F provides twelve. Then select FC/UPC or FC/APC to match the existing mating ports. MPO alignment-pin configuration, cable length and fanout dimensions can be matched to your installation.
For equipment builds or batch purchasing, DIMI can quote the finished MPO-to-FC harness to an agreed fiber count, connector arrangement and cable construction, rather than requiring on-site termination.
Choose Eight or Twelve FC Simplex Connections
8-fiber configuration: eight separate FC simplex tails with a 2.4 mm round main cable. This option suits installations that require eight FC terminations at the equipment side.
12-fiber configuration: twelve FC simplex tails with a 3.0 mm main cable. The individual legs can be routed to FC adapters positioned across a patch panel or test fixture.
DIMI lists a 12-position MPO/MTP interface for this family. A cable with eight active fibers does not imply an eight-position connector shell; the guide-pin arrangement and fiber-to-FC assignment must match the mating system. For an 8F or 12F project order, use the agreed port map to keep repeated assemblies consistent.

OS2 MPO to FC Cable Specifications for Procurement
| Specification | DIMI available configuration |
| Optical fiber | OS2 single mode, 9/125 µm |
| Fiber and FC end count | 8F to 8× FC simplex; 12F to 12× FC simplex |
| MPO connector | 12-position MPO/MTP; pinned or unpinned option to match the mating connector |
| FC interface | FC/UPC or FC/APC simplex |
| Main cable diameter | 2.4 mm for 8F; 3.0 mm for 12F |
| Breakout leg diameter | 2.0 mm or 3.0 mm |
| Main cable lengths | 1–100 m; standard lengths and custom increments listed |
| Fanout leg lengths | 0.5 / 1 / 1.5 / 2 / 3 m |
| Cable jacket options | LSZH standard; OFNP, PVC and armored versions listed |
| Standard jacket color | Yellow; other colors available |
| Typical MPO insertion loss | ≤0.35 dB per mated pair |
| Typical FC/UPC insertion loss | ≤0.30 dB per connector |
| Typical FC/APC insertion loss | ≤0.35 dB per connector |
| Published return-loss figures | UPC ≥50 dB; APC ≥60 dB |
| Fiber attenuation | ≤0.35 dB/km at 1310 nm; ≤0.25 dB/km at 1550 nm |
| Operating wavelength | 1260–1625 nm |
| Operating temperature | −20°C to +70°C |
Match FC UPC or FC APC to Your Existing Ports
Use FC/UPC where the connected equipment has a UPC-polished FC port. Choose FC/APC for an angled-polish FC interface. These two polish types should not be mated to each other.
The published typical insertion-loss values are ≤0.30 dB for FC/UPC and ≤0.35 dB for FC/APC, per connector. The corresponding return-loss figures are ≥50 dB for UPC and ≥60 dB for APC. MPO insertion loss is specified separately; none of these figures represents the maximum loss of an entire installed link.
For projects requiring only angled-polish FC ends, see the DIMI FC/APC-specific MPO assembly. It is a separate product selection, not a substitute for confirming the mating port on this cable.
MPO to FC Fanout for Distribution and Test Equipment
Custom MPO to FC Assemblies for OEM and Bulk Orders

DIMI custom MPO to FC cable assemblies can be specified by 8F or 12F count, FC/UPC or FC/APC polish, MPO pin configuration, trunk length and the layout of individual FC branches. The product range lists 1–100 m trunk lengths and fanout sections of 0.5, 1, 1.5, 2 or 3 m.
LSZH is the listed standard jacket. OFNP, PVC and armored options are also listed for projects with different cable-routing requirements; the required installation rating should be confirmed for the selected construction. Separate FC boots and fanout lengths make it possible to place the ends where the panel design requires them.
For repeat harness orders, DIMI can work from one approved configuration covering connector type, fiber mapping, lengths, jacket and quantity. This gives your purchasing and installation teams a consistent reference when requesting additional batches.
Insertion Loss and Inspection for Project Acceptance
DIMI publishes typical MPO and FC connector-loss figures for this OS2 breakout cable. For incoming inspection, compare the agreed limits with the actual connector polish, fiber map and intended optical path rather than treating individual connector values as a complete link budget.
If your project requires fiber-by-fiber test results, end-face inspection records or branch identification, include those deliverables with the requested assembly specification. Confirm the available inspection documents before placing the order; they should not be assumed to accompany every standard shipment.
The goal is to receive eight or twelve correctly mapped FC connections with agreed optical acceptance criteria, ready for integration into the designated equipment.

Questions Buyers Ask About MPO to FC Breakout Cables
What is the difference between the 8F and 12F versions?
The 8F version has eight FC simplex connector ends with a 2.4 mm main cable. The 12F version has twelve FC ends and a 3.0 mm main cable. Both are OS2 single-mode MPO-to-FC fanout assemblies.
Can I order FC/UPC instead of FC/APC?
Yes. DIMI lists FC/UPC and FC/APC options. Choose the end-face polish that matches your existing FC adapters and equipment ports; the two polishes are not interchangeable.
Does the 8F version use an eight-position MPO plug?
Not necessarily. The published connector family is a 12-position MPO/MTP interface, while the active fiber count can be eight. Specify the required pin arrangement and fiber mapping for the installed system.
Which MPO to FC cable lengths are available?
The listed main-cable range is 1–100 m. Fanout lengths include 0.5, 1, 1.5, 2 and 3 m, with customization options. Include your preferred trunk and branch lengths in the quotation request.
Can DIMI supply MPO to FC assemblies for repeat OEM orders?
DIMI offers project-specific cable and connector configurations. Share an approved fiber map, connector and jacket requirements, and order quantity to request pricing for repeat assemblies.

Request a DIMI MPO to FC OS2 Project Quote
Request pricing for a DIMI OS2 MPO to FC breakout cable with eight or twelve FC simplex ends. For an accurate quotation, include the FC polish, the MPO mating connector, main-cable and fanout lengths, jacket choice, required fiber map and order quantity.
If the installation calls for a broader connector or fiber-count selection, review the MPO to FC adapter cable family before confirming your OEM harness.
Hot Tags: mpo-fc-sm-8/12 fibers-fiber optic breakout cable, mpo-fc-sm-8/12 fibers-fiber optic breakout cable manufacturer, mpo-fc-sm-8/12 fibers-fiber optic breakout cable supplier, mpo-fc-sm-8/12 fibers-fiber
