Products Description

Pre-terminated High-Density Design

Factory-terminated and tested, eliminating field termination errors for rapid deployment and instant upgrades

100% Factory Optical Testing

Each cable undergoes full IL and RL testing with test reports provided, ensuring link reliability

Flexible Speed Migration Support

Enables smooth upgrades from 10G to 40G/100G, compatible with QSFP+/QSFP28 SR4 and 10G SFP+ module connectivity

Superior Optical Performance

Insertion loss ≤0.35dB per connector, return loss ≥20dB (UPC), meeting high-speed data transmission requirements

Multiple Jacket Ratings & Custom Options

Available in LSZH, OFNP, PVC jackets with 1~100m custom lengths to meet various data center requirements

Clear Polarity Management

Industry-standard Type B polarity design with color coding and labeling for simplified installation and maintenance

Technical Specifications

Parameter	Specification
Connector A	MPO/MTP Female, 12-fiber (8 active), PC polished
Connector B	8× LC Duplex (4 pairs), UPC polished
Fiber Type	OM3 50/125µm or OM4 50/125µm multimode
Fiber Count	8 fibers active (Position 1-8)
Cable Structure	Round trunk to breakout fanout with 3.0mm round cable
Trunk Cable Diameter	3.0mm round cable
Fanout Length	0.5m standard (customizable)
Jacket Rating	LSZH (standard), OFNP, PVC optional
Operating Temperature	-20°C to +70°C
Storage Temperature	-40°C to +85°C
Standard Color	Aqua (OM3), Erika Violet (OM4)
Cable Length	1m to 100m (custom lengths available)

Optical Performance

Parameter	OM3 Specification	OM4 Specification
Insertion Loss (IL)	≤0.35dB per connector	≤0.35dB per connector
Return Loss (RL)	≥20dB (UPC polished)	≥20dB (UPC polished)
Fiber Attenuation	≤3.0 dB/km @ 850nm	≤3.0 dB/km @ 850nm
Bandwidth	≥1500 MHz·km @ 850nm	≥3500 MHz·km @ 850nm
Max Transmission Distance	100m @ 10Gb/s, 70m @ 40Gb/s	150m @ 10Gb/s, 100m @ 40Gb/s

Products Description

team introduction

Lorem ipsum dolor sit amet, consectetur adipiscing slit. Nunc blandit dui eget ipsum pulvinar tempor. In laoreet elit sodales, finibs lorem nec, rutrum ipsum.

Cable Structure

This MPO to LC breakout cable features a robust fanout design consisting of a 3.0mm round trunk cable on the MPO end that transitions into eight individual 900µm buffered fibers, each terminated with LC duplex connectors. The MPO connector is a 12-fiber female interface with pins, using positions 1-8 for active fiber transmission (positions 9-12 remain unused for standard 8-fiber configurations).

Key Structural Features:

3.0mm round trunk cable

Eight 900µm buffered fibers

12-fiber MPO female connector (8 active)

LC duplex connectors with color-coded boots

0.5m standard fanout length (customizable)

Aramid yarn strength members

Factory Testing & Quality Assurance

3D Interferometric Endface Inspection

Every connector endface is inspected using automated interferometry to ensure surface quality meets IEC 61300-3-35 geometry requirements

100% Insertion Loss & Return Loss Testing

Each cable assembly undergoes full IL/RL testing at applicable wavelengths (850nm for multimode), with test results recorded

Polarity & Continuity Verification

Automated polarity testing confirms correct fiber mapping from MPO positions to LC connectors

Pull Test & Mechanical Inspection

Assemblies undergo mechanical stress testing to verify connector retention strength and aramid yarn strain relief effectiveness

Application Scenarios

40G QSFP+ to 10G SFP+ Breakout

Connect 40G QSFP+ SR4 switch ports to four 10G SFP+ ports, enabling cost-effective port density and bandwidth optimization in top-of-rack switching architectures

Data Center Structured Cabling

Link MPO-based trunk infrastructure to LC-based active equipment, bridging high-density backbone cabling with traditional duplex connectivity at distribution points

Server to Switch Connectivity

Direct connections from MPO-equipped servers or storage arrays to LC-based network switches, supporting high-performance computing and storage area network applications

Migration Path for Legacy Infrastructure

Enable organizations to leverage existing LC-based equipment while deploying new MPO infrastructure, providing a smooth transition path during network upgrades

Patch Panel to Active Equipment Links

Connect MPO cassettes or adapter panels in fiber distribution areas to LC ports on switches, routers, and media converters

Typical Topology Description

In a standard data center deployment, core switches with 40G QSFP+ ports connect via MPO-MPO trunk cables to high-density MPO patch panels. From these panels, MPO to LC breakout cables fan out to connect top-of-rack switches with LC-based 10G SFP+ ports.

Products Description

Cable Length

Any length from 1 meter to 100 meters; longer lengths available upon request for special applications

Fiber Type Selection

OM3 (aqua), OM4 (erika violet), OM5 (lime green) multimode; OS2 singlemode options available for long-distance applications

Fiber Count

8-fiber (standard), 12-fiber, 24-fiber configurations available to match your port density requirements

Connector Polish Type

UPC (standard for multimode), APC available for singlemode versions requiring enhanced return loss performance

MPO Connector Options

Female with pins (standard), female without pins, male connector configurations; elite or premium grade connector options

Fanout Length

Standard 0.5m, customizable from 0.3m to 3.0m based on rack depth and cable management requirements

Jacket Rating

LSZH (low smoke zero halogen) for enclosed spaces, OFNP (plenum-rated) for air-handling spaces, PVC for general purpose, armored outdoor-rated for inter-building links

Color Coding

Custom boot colors, numbered labeling, custom printing on cable jacket for asset management and DCIM integration